5.8 GHz ETC Chip
home PRODUCTDSRC ETCS 5.8 GHz ETC Chip

AP-DOB530

Product Features

  • CPU : ARM Cortex-M3
    - Max 100 MHz operation (Dhrystone MIPS : 125MIPS@MHz)
    - 8Kbytes Instruction/Data cache
  • Memory : 512KB internal
  • Clock Generation : Three Analog PLL for CPU & System / Audio / Modem
  • DSRC Modem embedded
  • Flexible memory interface : Two SPROM Interface
    - Quad IO supported
    - 32-bit addressing supported
  • External audio codec interface
    - I2S with DMA : use four buffer
    - Audio Decoder : Wave/Wavpack supported
  • Oscillator/Crystal Frequency range : 12 ~ 32 MHz
  • Two smart card interface : ISO-7816 supported
  • Package : 100pin LGA (14 x 14mm)
  • Supply Power : 1.2V (Core) / 3.3V (I/O)
More Detail

Product Specifications

  • Serial wire JTAG debug port ( SWJ-DP ) supported
  • 31 GPIO
  • Four Timer (One 64-bit / Three 32-bit Timer)
  • One PWM
  • Watchdog Timer
  • Three UART
  • TWO SPI master
  • 10 External interrupt source : Edge(Rising/Falling) & Level(High/Low) trigger
  • USB2.0 supported : Full Speed(12Mbps) / Low Speed(1.5Mbps)
  • 10-Bit Resolution ADC : 3-channel / External reference voltage : 2.5 ~ 3.3V
  • Flash fusing using UART is supported
  • Two I2C port for host controllers or peripherals
  • RoHS compliance
  • AEC-Q100 qualified
More Detail

Block Diagram

close

AP-DOB500

Product Features

  • CPU : ARM Cortex-M3
    - Max 100 MHz operation (Dhrystone MIPS : 125MIPS@MHz)
    - 8Kbytes Instruction/Data cache
  • Memory : 512KB internal
  • Clock Generation : Three Analog PLL for CPU & System / Audio / Modem
  • DSRC Modem embedded
  • Two smart card interface : ISO-7816 supported
  • Package : 144pin FBGA (12 x 12mm)
  • Recommended Oscillator/Crystal Frequency : 12 MHz
  • Supply Power : 3.3V
More Detail

Product Specifications

  • JTAG debug port supported
  • 16 GPIO
  • Four Timer (One 64-bit / Three 32-bit Timer)
  • One PWM
  • Watchdog Timer
  • Two UART
  • One SPI master with three chip-select pins
  • 10 External interrupt source : Edge(Rising/Falling) & Level(High/Low) trigger
  • External Audio Codec interface
    - I2S with DMA : use four buffer
  • Two I2C port for host controllers or peripherals
  • USB2.0 Full Speed Device
  • 10-Bit Resolution ADC : 3-channel / External reference voltage : 3.3V
  • Serial Flash booting supported
  • Flash fusing using UART is supported
More Detail

Block Diagram

close

AP-DOR5830G

Product Features

  • Frequency range (Receiver : 5.79 ~ 5.84GHz / Transmitter : 5.79 ~ 5.84GHz)
  • Modulation (ASK modulation / Modulation index : 50 ~ 100%)
  • Nominal output power : +5dBm / ±2dB tolerance / 25dB output range with 0.5dB step / 50 ~ 100% modulation index with 5% step (2.5% step size between 75% and 95%)
More Detail

Product Specifications

  • Data rate
    - Receive / Transmit  : 1.024Mbps - For Korea
    - Wake-up : 14Kbps, Receive : 256Kbps, Transmit : 512Kbps - For China
  • Sensitivity (with 0dBi antenna)
    - Normal Frame (85% ASK) : -79dBm(w/o Ext. LNA), -85dBm(with Ext. LNA) – For Korea
    - Wake-up (85% ASK) : -42dBm, Normal Frame (85% ASK) : -65dBm – For China
  • Operating temperature range : -40℃ ~ +100℃
More Detail

Block Diagram

close
Modem IC
  • Solutions necessary for OBU development, compatible with TTA specifications
  • Used for the development of ETCS (Electronic Toll Collection System) and ATMS (Automatic Traffic Management System)
AP-DOB530

VIEW MORE
AP-DOB500

VIEW MORE
RF IC
  • Solutions for OBU/RSU development, compatible with 5.8Ghz DSRC RF TTA Specifications
  • Used for the development of ETCS (Electronic Toll Collection System) and ATMS (Automatic Traffic Management System)
AP-DOR5830G

VIEW MORE